\n
The wood-based activated carbon production machine<\/strong> is a type of equipment that converts wood raw materials (such as wood chips, sawdust, coconut shells, etc.) into activated carbon through processes like carbonization<\/strong> ve activation<\/strong>. Its core purpose is to manufacture efficient adsorbent materials with a highly developed pore structure, which are widely used in environmental protection, water purification, chemical industry, metallurgy, food processing, and new energy fields.<\/p>\n\n\n\nWood suitable for making activated carbon generally has the following characteristics:<\/p>\n\n\n\n
Dense wood structure and well-developed ducts, which facilitate the formation of abundant pores after carbonization;<\/p>\n\n\n\n
Low ash content, preventing excessive inorganic impurities from affecting the purity and adsorption properties of the activated carbon;<\/p>\n\n\n\n
High carbon content and moderate volatile matter content, which facilitate the formation of activated carbon with a large specific surface area.<\/p>\n\n\n\n
Common woods suitable for making activated carbon include:<\/h2>\n\n\n\n1.Hardwoods (dense structure, well-developed pores, and excellent activated carbon properties)<\/h3>\n\n\n\n\nOak<\/strong><\/li>\n\n\n\nBirch<\/strong><\/li>\n\n\n\nMaple<\/strong><\/li>\n\n\n\nWalnut<\/strong><\/li>\n\n\n\nCamphor<\/strong><\/li>\n<\/ul>\n\n\n\n2.Tropical and subtropical woods<\/h3>\n\n\n\n\nPalm<\/strong><\/li>\n\n\n\nAcacia<\/strong><\/li>\n\n\n\nEucalyptus<\/strong><\/li>\n<\/ul>\n\n\n\n3.Fast-growing woods (can be cultivated on a large scale and are suitable for industrial activated carbon production)<\/h3>\n\n\n\n\nPoplar<\/strong><\/li>\n\n\n\nWillow<\/strong><\/li>\n<\/ul>\n<\/div>\n<\/div>\n\n\n\n
<\/figure>\n<\/div>\n\n\n\n
\n
Wood Based Activated Carbon Making Machine Working Principle And Process Flow<\/h2>\n\n\n\nThe production of wood-based activated carbon mainly involves two key processes: carbonization<\/strong> ve activation<\/strong>.<\/h3>\n\n\n\n\nCarbonization<\/strong>: The wood raw material is heated to a high temperature (usually between 600-800\u00b0C ) under anaerobic or oxygen-limited conditions. This process decomposes the volatile substances in the wood, removes moisture and tar, and forms a primary carbon structure with certain porosity\u2014namely, charcoal.<\/li>\n\n\n\nActivation<\/strong>: The carbonized charcoal is treated at a higher temperature (using physical or chemical methods) to further expand its pore structure and increase its specific surface area, thus obtaining excellent adsorption performance. Activation methods are mainly divided into:\n\nPhysical Activation<\/strong>: Uses oxidizing gases (such as water vapor, flue gas ) at high temperatures (800-1000\u00b0C) to etch the carbon structure.<\/li>\n\n\n\nChemical Activation<\/strong>: Mixes the raw material with chemical agents (such as phosphoric acid, zinc chloride) before carbonization, which is then decomposed and activated at lower temperatures.<\/li>\n<\/ul>\n<\/li>\n<\/ol>\n\n\n\n
<\/figure>\n<\/div><\/div>\n<\/div>\n\n\n\nWood Based Activated Carbon Making Machine Parameter<\/h2>\n\n\n\ncapacity<\/td> 5-8t\/d<\/td> 8-10t\/d<\/td> 10-12t\/d<\/td> 12-15t\/d<\/td> 15-20t\/d<\/td><\/tr> Dryer model<\/td> HG-800<\/td> HG-1000<\/td> HG-1200<\/td> HG-1500<\/td> HG-1800<\/td><\/tr> Dryer power<\/td> 3kw<\/td> 4kw<\/td> 7.5kw<\/td> 15kw<\/td> 22kw<\/td><\/tr> continuous carbonization furnace model<\/td> TH-1500<\/td> TH-1500<\/td> TH-1800<\/td> TH-2000<\/td> TH-2000<\/td><\/tr> Carbonization temperature<\/td> 600-850\u2103<\/td><\/tr> Fixed carbon content after carbonization<\/td> 70-80%<\/td><\/tr> Carbonization furnace drum material<\/td> 309S\/310S<\/td> 309S\/310S<\/td> 309S\/310S<\/td> 309S\/310S<\/td> 309S\/310S<\/td><\/tr> Activation furnace model<\/td> HN-5<\/td> HN-8<\/td> HN-10<\/td> HN-12<\/td> HN-15<\/td><\/tr> Activation furnace power<\/td> 15kw<\/td> 22kw<\/td> 30kw<\/td> 37kw<\/td> 37kw<\/td><\/tr> Activation furnace chamber material<\/td> QQ345+nano thermal insulation board+refractory<\/td><\/tr> Activation temperature<\/td> 850-950\u2103<\/td><\/tr> Activator<\/td> Water vapor or Phosphoric acid (customized according to customer requirements, equipment design will be updated)<\/td><\/tr> Activation time<\/td> 1-2h<\/td><\/tr> Cooling machine model<\/td> GTL-1004<\/td> GTL-1204<\/td> GTL-1206<\/td> GTL-1504<\/td> GTL-1506<\/td><\/tr> Temperature after cooling<\/td> \u226440\u2103<\/td><\/tr> Activated carbon crusher model<\/td> SGP-400<\/td> SGP-400<\/td> SGP-600<\/td> SGP-800<\/td> SGP-800<\/td><\/tr> Activated carbon finished product size<\/td> 4-60mesh<\/td><\/tr> Activated carbon iodine value<\/td> 800-1300mg\/g<\/td><\/tr> Activated carbon specific surface area<\/td> 800-1500m\u00b2\/g<\/td><\/tr> Activated carbon strength<\/td> \u226595<\/td><\/tr> CTC<\/td> \u226560%<\/td><\/tr> Filling density<\/td> 0.45-0.55g\/cm3<\/td><\/tr> Activated carbon ash<\/td> \u22643%<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\nWood Based Activated Carbon Making Machine Video<\/h2>\n\n\n\n